Using The Dvr’s On-Screen Display; Using The Taskbar; Using The Quick Menu - Lorex LHA4100 series Instruction Manual

7
Using the DVR's On-Screen
Display
Use the system's graphical on-screen display to navigate menus and configure options
and settings.

7.1 Using the Taskbar

The Taskbar along the bottom of the DVR's main display allows you to access the Main
Menu and control basic functions of the DVR.
1. Main Menu: Opens the Main Menu for browsing. For details on Main Menu functions,
see 12 Using the Main Menu, page 48.
2. View Options: Select how many camera channels are shown during live viewing.
3. Start / Stop SEQ: Start or stop Sequence Mode. In Sequence Mode, the DVR auto-
matically switches between channels every few seconds.
4. Playback: Opens the Playback Menu. This allows you to search for video recordings
saved on the DVR's hard drive. For details on using the Playback menu, see 9 Play-
back, page 25.
5. Mute: Mute system audio.
NOTE
Muting system audio does not affect audio in recordings (microphone required — see 18 Recording
Audio, page 139 for details).
6. Volume Bar: Click inside the Volume Bar, or hover over it and use the scroll wheel to
change system volume.
7. System Information: Displays system information.
8. Auto Upgrade: Checks for an available firmware update. For details, see 12.6.6 Using
Automatic Firmware Upgrade, page 90
9. System Date & Time: Shows the date and time of the system.
10. Pin / Unpin Taskbar: Choose to always show the Taskbar on screen (
unless the mouse pointer is near the bottom of the screen (

7.2 Using the Quick Menu

The Quick Menu gives you quick access to functions which can also be accessed using
the Taskbar.
To use the Quick Menu:
• Right-click on a camera channel in the live viewing screen.
• The Quick Menu appears:
#LX400086; r. 1.0/39246/39246; en-US
) or hide it
).
16