Creating Groups; Single-Channel Live View - Lorex LHA4100 series Instruction Manual

14 FLIR Secure: Connecting to the DVR Using a Mobile Device

Single-Channel Live View

1. Channel Number / Name
2. History: Tap to view recorded videos saved on your recorder's hard drive.
3. Live View: Double-tap to zoom in. Turn your mobile device sideways to view in land-
scape mode, or hold upright to view in portrait mode.
4. Disconnect: Tap to disable live video, video recording, and push notifications. Tap
again to enable the disconnected camera.
5. : Tap to open channel settings for the selected camera channel. You can change
the channel name, enable PTZ controls (for PTZ cameras only), enable camera's mi-
crophone (for audio-enabled cameras only), and enable motion detection notification
for the selected camera channel. Tap Save after you make your changes. On the chan-
nel settings screen, swipe to the bottom of the screen and tap DEVICE SETTINGS to
view your device information. You can also change the device name, enable / disable
mobile notifications for your device, enable / disable device error notifications, and
check the Cloud subscription plan for your camera channels.
6. Quick Playback: Tap to play back video from the last 30 seconds for the camera
channel. Tap anywhere on the video to pause / play the playback.
7. Enhance Resolution: Tap to enhance the resolution of the camera image.
8. Snapshot: During single-channel live view and quick playback mode, tap to take a
screenshot of the currently-selected channel. Your mobile device must be in portrait
mode.

14.2 Creating Groups

Group multiple cameras from various devices using FLIR Secure. You can then quickly
bring up the selected group of cameras in live view without having to select each camera
individually.
1. From the home screen, tap
#LX400086; r. 1.0/39246/39246; en-US
.
126