Enabling/Disabling Manual Capture - Lorex LHA4100 series Instruction Manual

13 FLIR Client 12 for PC / Mac
9. (OPTIONAL) Use the Copy function to copy your settings to another or all connected
cameras. See 13.6.1 Copying Channel Settings to Another Channel, page 98 for de-
tails on using the copy function.

13.6.9 Enabling/Disabling Manual Capture

Manual Capture allows you to quickly take snapshots from enabled channels.
NOTE
Enabling or disabling Manual Capture only affects your ability to take manual snapshots from the DVR.
You will still be able to capture snapshots using FLIR Client 12.
To enable Manual Capture:
1. Click Remote Setting in the top-right corner of the window.
2. Under Settings, click Picture to open the Picture tab.
3. Use the dropdown next to Channel to select a channel to enable Manual Capture for.
4. Click the switch next to Manual Capture to enable (
Capture for the selected channel.
5. Click Save.
You can now use Manual Capture on the selected channel using the Mini Menu. For
details on using Manual Capture, see 7.3 Using the Mini Menu, page 17.
6. (OPTIONAL) Use the Copy function to copy your settings to another or all connected
cameras. See 13.6.1 Copying Channel Settings to Another Channel, page 98 for de-
tails on using the copy function.
13.6.10 Setting a Picture Schedule for Auto Capture
The picture schedule determines the time periods that the system will use Auto Capture
during. You can set separate schedules for continuous and motion recording for the same
channel.
Prerequisites:
• You must have enabled Auto Capture on at least one channel to set a picture schedule.
See 13.6.8 Configuring Auto Capture, page 104 for details on enabling and configuring
Auto Capture.
To set a picture schedule:
#LX400086; r. 1.0/39246/39246; en-US
) or disable ( ) Manual
105