Lorex LHA2000 Series Quick Networking Manual

Before You Start:
• Make sure you • Connect your DVR
have a router to your router
and high-speed using an Ethernet
Internet access cable (see the
(not included). Quick Connection
Guide for details).
1
2 Find Your Device ID
The Device ID is printed on a label on the top panel of the DVR.
Device ID: xxxxxxxxxxx
Record your information below:
DEVICE ID:
LHA2000 / LHA4000 SERIES
Quick Networking Guide
• Upgrade your DVR • Please note that an upload
firmware and client speed of 2 Mbps is required
software or mobile for remote video streaming
app to the latest (3 Mbps and above
versions. recommended). Up to 3
devices may connect to the
system at the same time.
LHA2000 / LHA4000 Series
HD Digital Video Surveillance Recorder
2
PC / Mac Setup
a
Download and install the client software:
• PC Users: Download and install FLIR Client 12 for
PC from lorextechnology.com/support.
• Mac Users: Download and install FLIR Client 12
for Mac from lorextechnology.com/support.
Double-click to extract the software, then drag
the software to Applications.
Double-click the FLIR Client 12 icon (
b
on the desktop or Applications list.
c
Enter the following information:
Enter the
DVR's Device
ID recorded in
section 1
Enter the DVR's
Client Port
(default: 9000)
Enter the DVR's
user name
(default: admin)
Enter the secure
password you
created for the
DVR
Congratulations! You can now view video from your cameras on your PC or Mac.
d
Click Login.
All connected cameras are shown
e
on screen in the FLIR Client 12 home
screen.
)
NOTE: For full instructions on how to
use the FLIR Client 12 software for PC
and Mac, see your DVR's instruction
manual at lorextechnology.com.
LHA2000_LHA4000_SERIES_QNG_EN_R1