Setting A Picture Schedule For Auto Capture - Lorex LHA4100 series Instruction Manual

12 Using the Main Menu
1. Under Settings, click Picture, then click on the Picture tab.
2. Use the dropdown next to Channel to select a channel to configure Auto Capture for.
3. Select Enable from the dropdown next to Auto Capture.
4. Use the dropdown next to Stream Mode to select Mainstream or Substream for Auto
Captures.
5. Select a time period from the dropdown next to Continuous Interval. A snapshot will
be captured at every continuous interval even if there is no activity in the camera
image.
6. Select a time period from the dropdown next to Alarm Interval. A snapshot will be
captured at every alarm interval while a motion event is occurring.
7. Click Save.
8. (OPTIONAL) Use the Copy function to copy your settings to another or all connected
cameras. See 12.1.1 Copying Channel Settings to Another Channel, page 49 for de-
tails on using the copy function.

12.2.13 Setting a Picture Schedule for Auto Capture

The picture schedule determines the time periods that the system will use Auto Capture
during. You can set separate schedules for continuous and motion snapshots within the
same channel.
Prerequisites:
• You must have enabled Auto Capture on the selected channel for the picture schedule
to take effect. See 12.2.12 Configuring Auto Capture, page 61for details on enabling
and configuring Auto Capture.
To set a picture schedule:
#LX400086; r. 1.0/39246/39246; en-US
62