Other Functions; Tape Counter (Zero Search); Setting The Security Lock (Set Lock); Setting The High Picture - Lorex SG7970 User Manual

Other Functions

Tape Counter (Zero Search)

• When you insert a
Using the counter, it is easy to find a desired recording.
cassette, the counter
always resets to zero.
1 Press the CLEAR button, at the beginning of the
• There is no tape counter
desired recording.
indication for the blank
portions of tape.
• The counter will be reset to "0H 00M 00S" (on screen).
• In the 2-hour recording
• The counter will be reset to "0H 00M"(on the display
speed mode only, the tape
panel).
counter indicates real
hours, minutes and
2 After recording or playback, press the Menu button
seconds.
to display the initial MENU.
• In the other SP recording
speed modes (48H), the
3 Press the SHIFT
tape counter indication is
a ratio of the 2-hour mode (
base indication.(In 48-
hour recording mode, 4 Press the SHIFT
each "second" of the tape
SELECT menu. The SEARCH SELECT menu is
counter actually represents
approximately 48/2 =
displayed.
24 real seconds.)
• In the other EP recording
speed modes (18H), the
tape counter indication is
a ratio of the 6-hour mode
base indication. (In 18-
hour recording mode,
each "second" of the tape
counter actually represents
approximately 18/6 = 3
5 Press the SHIFT
real seconds.)
(
• In the other EP recording
speed modes (30H), the
6 Press the SHIFT
tape counter indication is
00M 00S"("0H 00M" on the display panel).
a ratio of the 6-hour mode
base indication. (In 30-
• The display returns to the normal screen.
hour recording mode,
each "second" of the tape
• The tape is rewound or advanced to the counter "0H
counter actually represents
00M 00S" reading("0H 00M" on the display panel).
approximately 30/6 = 5
real seconds.)
• There may be a slight
discrepancy between the
position shown on the
tape counter and the
actual tape position.
• When rewinding the tape
past the "0H 00M 00S"
position("0H 00M" on the
display panel), a minus(-)
displayed.
32
button to move the arrow mark
) to Search Select.
button to display the SEARCH
button to move the arrow mark
) to Zero Search.
button to search the counter "0H
Time Lapse Video Cassette Recorder

Setting the Security Lock (Set Lock)

The security lock function is designed to prevent
accidental stopping of recording if the STOP button is
• While the security lock is
pressed inadvertently.
engaged, all commands
are disabled.
1 Set the SET LOCK switch to "ON" position.
• The security lock should
• "
not be engaged while a
2 To cancel the security lock, set the SET LOCK switch
menu is displayed.
to "OFF" position.
• "

Setting the HIGH PICTURE

With this function, you can view the screen in high-
picture quality.
1 Set the HIGH-PICTURE switch to "ON" position.
• " H.P" is displayed on the display panel.
2 To cancel the HIGH-PICTURE function, set the HIGH-
PICTURE switch to "OFF" position.
• " H.P" is disappeared from the display panel.
Time Lapse Video Cassette Recorder
" is displayed on the display panel.
" will be erased from the display panel.
33