Behringer DEEPMIND 12 User Manual page 25

25 DeepMind 12 User Manual
USB SETTINGS MENU- This menu contains settings for the USB port on the rear
of the DeepMind 12.
To access the USB SETTINGS menu, make sure that the ' < ' symbol on the USB
SETTINGS line is highlighted. Then press the +/YES switch, you will now see the
USB SETTINGS menu..
USB-CTRL - This option sets the MIDI CONTROLLER communication mode for
• •
the DeepMind 12 USB port on the rear of the synthesizer. You can choose Off
(No controller messages will be sent), Cc (Continuous Controller) or NRPN
(Non-Registered Parameters.
Note: Both MIDI and NRPN data is always received and actioned.
Note: For more information on controlling the DeepMind 12 via USB-MIDI,
please consult the section on MIDI later in this document.
• • PROG-CHANGE - This option sets the PROGRAM CHANGE communication
mode for the DeepMind 12 USB host port. You can choose from the following
options:
RX - Program change messages will be received only.
TX - Program changes will be transmitted only.
RX-TX - Program changes will be transmitted and received.
NONE - No program change messages will be sent or received.
• • RX-CHANNEL - This option sets the MIDI channel that will be used to
RECEIVE MIDI messages. The CHANNEL can be any number from 1-16.
• • TX CHANNEL - This option sets the MIDI channel that will be used to
TRANSMIT MIDI messages. The CHANNEL can be any number from 1-16.
• • USB>MIDI-THRU - This option enables PASS-THRU mode from the USB port
to the MIDI-THRU socket. The options are On or Off .
• • USB>WIFI-THRU - This option enables PASS-THRU mode from the USB port
to the WIFI host. The options are On or Off .
To exit this menu press the GLOBAL switch to return to the CONNECTIVITY menu.
WIFI SETTINGS MENU- This menu contains settings for the WIFI connection of
the DeepMind 12.
To access the WIFI SETTINGS menu, make sure that the ' < ' symbol on the WIFI
SETTINGS line is highlighted. Then press the +/YES switch, you will now see the
WIFI SETTINGS menu
WIFI-CTRL - This option sets the MIDI CONTROLLER communication mode
• •
for the DeepMind 12 WIFI connection. You can choose Off (No controller
messages will be sent), Cc (Continuous Controller) or NRPN (Non-Registered
Parameters.
Note: Both MIDI and NRPN data is always received and actioned.
Note: For more information on controlling the DeepMind 12 via WIFI-MIDI
please consult the section on MIDI later in this document.
• • PROG-CHANGE - This option sets the PROGRAM CHANGE communication
mode for the DeepMind 12 WIFI connection. You can choose from the
following options:
RX - Program change messages will be received only.
TX - Program changes will be transmitted only.
RX-TX - Program changes will be transmitted and received.
NONE - No program change messages will be sent or received.
• • RX-CHANNEL - This option sets the MIDI channel that will be used to
RECEIVE MIDI messages. The CHANNEL can be any number from 1-16.
• • TX CHANNEL - This option sets the MIDI channel that will be used to
TRANSMIT MIDI messages. The CHANNEL can be any number from 1-16.
• • WIFI>MIDI-THRU - This option enables PASS-THRU mode from the WIFI
connection to the MIDI-THRU socket. The options are On or Off .
• • WIFI>USB-THRU - This option enables PASS-THRU mode from the WIFI
connection to the USB host. The options are On or Off .
To exit this menu press the GLOBAL switch to return to the CONNECTIVITY menu.