Behringer DEEPMIND 12 User Manual page 45

45 DeepMind 12 User Manual
The GATE TIME for each step can then be changed by using the UP/DOWN
switches or using the data entry fader.
PATTERN STEP GATE TIME
GATE TIME
Note: To tie steps start by selecting the step you want to tie to the next one,
hold the FX switch, then turn rotary knob clockwise. You can tie several steps
together by continuing to rotate the rotary knob without having to release
the FX switch. To remove the tie, select the note that is tied to previous, hold
FX switch, turn rotary knob anti-clockwise. You can also do this with several
steps in the same way as creating a tie.
Note: The GATE TIME FADER on the front panel, and the GATE TIME
PARAMETER in the PATTERN EDITOR both aff ect the length of the notes.
With the GATE TIME FADER at maximum the note length matches the full
length of the PATTERN GATE TIME.
With the GATE TIME fader is in the middle then the note length is half of the
PATTERN GATE TIME.
(5) LENGTH - To adjust the LENGTH of the pattern (the number of steps), press
the GLOBAL switch (under the LEN text) to enter LENGTH editing mode.
When you are in LENGTH editing mode the virtual switch will be reversed
(white on black).
The LENGTH of the PATTERN can then be changed by using the UP/DOWN
switches or using the data entry fader.
(6) COMP - This switch allows you to COMPARE the current status of the
PATTERN being edited against the stored PATTERN. To use the PATTERN
COMPARE function, press the COMPARE switch (under the COMP text) to
enter COMPARE mode. When you are in COMPARE mode the virtual switch
will be reversed (white on black).
Note: The COMP switch is only available when a USER PATTERN is selected.
(7) SAVE/IMPORT -This switch allows you to SAVE the current PATTERN, or
IMPORT a PATTERN. When you press the WRITE switch (under the SAVE/
IMPORT text) you will be presented with two options:
You can now use the -/NO and +/YES switches to select SAVE or IMPORT, or
the EDIT ARP/SEQ switch to exit the dialog. All three switches will fl ash to
show that they are the available options:
NO=SAVE YES=IMPORT
SAVE - This will save your edits into the currently selected location. This will
overwrite the PATTERN stored in the current location.
Note: You can only SAVE into USER PATTERN locations, as the PRESET
PATTERNS are protected.
IMPORT - Selecting IMPORT will open a read only version of the PATTERN
EDITOR page, so that you can preview the pattern which will be imported
into the current location. Parameters cannot be edited in this page.
To select a PATTERN to IMPORT use the -/NO and +/YES switches. To IMPORT a
PATTERN press the WRITE switch (under the IMPORT text). To cancel the IMPORT,
press the PROG switch (under the BACK text).
CANCEL - This will cancel the SAVE/IMPORT function and return you to the
PATTERN EDITOR.
Note: The SAVE/IMPORT switch is only available when a USER PATTERN is
selected.
EDIT=CANCEL