Behringer DEEPMIND 12 User Manual page 91

91 DeepMind 12 User Manual
FlangeVerb (FLANGER & REVERB)
No DM12 REF PARAMETER
1* SPD Speed
2* DEP Depth
3 DLY Delay
4* PHS Phase
5* FBK Feed
6* BAL Balance
7 PRE PreDelay
8* DCY Decay
9 SIZ Size
10* DMP Damping
11* LC LoCut
12* MIX Mix
MidasEQ (MIDAS EQUALIZER)
No DM12 REF PARAMETER
1 LSG* LoShelfGain
2 LSF* LoShelfFreq
3 LMG* LoMidGain
4 LMF* LoMidFreq
5 LMQ* LoMidQ
6 HMG* HiMidGain
7 HMF* HiMidFreq
8 HMQ* HiMidQ
9 HSG* HiShelfGain
10 HSF* HiShelfFreq
11 EQ* EQ
UNITS MIN MAX
Hz 0.0 Hz 4.0 Hz
% 0.0% 100%
ms 0.5 ms 20.0 ms
— 0.0 180.0
% -90.0% 90.0%
— -100.0 100.0
ms 0.0 200.0 ms
s 0.1 s 5.0 s
— 2.0 200.0
Hz 1000 Hz 20000 Hz
Hz 10.0 Hz 500.0 Hz
% 0.0% 100%
UNITS MIN MAX
dB -12.0 dB 12.0 dB
Hz 30.0 Hz 20000.0 Hz
dB -12.0 dB 12.0 dB
Hz 30.0 Hz 20000.0 Hz
— 0.3 5.0
dB -12.0 dB 12.0 dB
Hz 30.0 Hz 20000.0 Hz
— 0.3 5.0
dB -12.0 dB 12.0 dB
Hz 30.0 Hz 20000.0 Hz
— IN OUT
DESCRIPTION
Adjusts the rate of the fl anger. Time synchronised options from 4 to 1/64 bars.
Adjusts the modulation depth of the fl anger.
Adjusts the delay of the fl anger.
Off sets the phase between the left and right channels.
Controls the percentage of positive or negative feedback.
Adjusts the balance between fl anger and reverb.
Controls the amount of time before the reverb is heard following the source signal.
Controls the amount of time it takes for the reverb to dissipate.
Controls how large or small the simulated space is.
Determines the decay of high frequencies within the reverb tail.
Excludes low frequencies below the value.
Controls the mix (or ratio) of wet (processed) and dry (unprocessed) signals.
DESCRIPTION
Adjusts the gain of the low band.
Adjusts the frequency of the low band.
Adjusts the gain of the low-mid band.
Adjusts the frequency of the low-mid band.
Adjusts the Q-factor of the low-mid band.
Adjusts the gain of the high-mid band.
Adjusts the frequency of the high-mid band.
Adjusts the Q-factor of the high-mid band.
Adjusts the gain of the high band.
Adjusts the frequency of the high band.
Adjusts the frequency of the high band.