Behringer DEEPMIND 12 User Manual page 99

99 DeepMind 12 User Manual
Chorus-D (DIMENSIONAL CHORUS)
No DM12 REF PARAMETER
1 ON On
2 MOD Mode
3* MIX Mix
4 SW1 Sw1
5 SW2 Sw2
6 SW3 Sw3
7 SW4 Sw4
Flanger (STEREO FLANGER)
No DM12 REF PARAMETER
1* SPD Speed
2* WDL WidthL
3* WDR WidthR
4 DLL DelayL
5 DLR DelayR
6* MIX Mix
7* LC LoCut
8* HC Hi Cut
9 PHS Phase
10* FLC FeedLC
11* FHC FeedHC
12* FD Feed
UNITS MIN MAX
— OFF ON
— M ST
% 0.0% 100%
— OFF ON
— OFF ON
— OFF ON
— OFF ON
UNITS MIN MAX
Hz 0.0 Hz 5 Hz
%
0.0% 100%
% 0.0% 100%
ms 0.5 ms 20.0 ms
ms 0.5 ms 20.0 ms
% 0.0% 100%
Hz 10.0 Hz 500.0 Hz
Hz 200.0 Hz 20000.0 Hz
— 0.0 180.0
Hz 10.0 Hz 500.0 Hz
Hz 200.0 Hz 20000.0 Hz
% -90.0% 90.0%
DESCRIPTION
Allows the eff ect to be turned On or Off .
Switches the operation between Mono and Stereo modes.
Controls the mix (or ratio) of wet (processed) and dry (unprocessed) signals.
Engages level one intensity (minimum).
Engages level two intensity.
Engages level three intensity.
Engages level four intensity (maximum).
DESCRIPTION
Sets the modulation speed. Time synchronised options from 4 to 1/64 bars.
Determines the amount of modulated delay in the left channel.
Determines the amount of modulated delay in the right channel.
Sets the total amount of delay for the left channel.
Sets the total amount of delay for the right channel.
Controls the mix (or ratio) of wet (processed) and dry (unprocessed) signals.
Allows the low frequencies in the signal to be reduced.
Allows the high frequencies in the signal to be reduced.
Adjusts the phase off set of the LFO between left and right channel.
Adjusts the low cut fi lter frequency in the feedback path.
Adjusts the high cut fi lter frequency in the feedback path.
Controls the percentage of positive or negative feedback.