Behringer DEEPMIND 12 User Manual page 26

26 DeepMind 12 User Manual
NETWORK SETTINGS MENU- This menu contains settings for the WiFi
connection of the DeepMind 12.
The DeepMind 12 supports the Real-Time MIDI (RTP) protocol for use with
network devices/applications.
To access the NETWORK SETTINGS menu, make sure that the ' < ' symbol on the
NETWORK SETTINGS line is highlighted. Then press the +/YES switch, and you
will now see the NETWORK SETTINGS menu:
There are three modes for the NETWORK connection:
• • Off - Network connection is disabled.
• • Client - This mode allows the DeepMind 12 to act as a client so that it can
connect to an access point.
• • Access Point (Software Enabled Access Point) - The DeepMind 12 can create
an access point which will allow clients/devices to connect to it.
The default mode for the NETWORK connection is Off . This mode persists across
power cycles.
Client Mode - When Client mode is selected, additional options are displayed:
To navigate the options in Client mode, use the UP and DOWN switches.
In order to change any of the parameters, make sure that the ' < ' symbol is on the
respective line, and press the +YES switch to edit.
• • ENABLE - This shows the current state of the Client Mode connection - there
are 4 states: Disconnected, Connecting, Connected, and Disconnecting.
It is possible to initiate a connection using the YES switch, and cancel a
connection using the NO switch.
• • SSID and Password - These are the SSID and Password strings the
DeepMind12 uses to connect to the desired network. Editing the values of
these strings will bring up a text editing pop up dialog.
When editing any of the details, the dialog allows you to enter alphanumeric
characters and also shows CANCEL, DELETE, CAPS LOCK and INSERT options.
Once you have changed the details to your requirements, press the OK switch
to confi rm the settings.
• • IP - Shows the IP address assigned to the DeepMind12 by the DHCP server
running on the Access Point it is connected to.
Access Point Mode - When this mode is selected, additional options
are displayed:
In Access Point mode, you will need to enter the details of the access point you
wish to create.
To navigate the options in Access Point mode, use the UP and DOWN switches.
In order to change any of the parameters make sure that the ' < ' symbol is on the
respective line, and press the +YES switch to edit.
• • ENABLE - This shows the current state of the Access Point connection - there
are 7 states: Disabled, Enabling, Enabled, Disabling, Connecting, Connected,
and Disconnecting. It is possible to enable the AP using the YES switch, and
disable the AP using the NO switch. Once the AP is enabled, the connection
status of any client that connects to the DeepMind12 will be shown as either
Connecting, Connected, or Disconnecting. It is possible to reject a client that
has already connected, by pressing NO.
• • SSID and Password - These are the SSID and Password strings the
DeepMind12 uses to create the Access Point network. Editing the values of
these strings will bring up a text editing pop up dialog:
When editing any of the details, the dialog allows you to enter alphanumeric
characters and also shows CANCEL, DELETE, CAPS LOCK and INSERT options.
Once you have changed the details to your requirements, press the OK switch
to confi rm the settings.
• • IP - Shows the IP address the DeepMind12 uses for the Access Point.
• • Channel - This shows the Wireless channel used by the Access Point.