Behringer DEEPMIND 12 User Manual page 97

97 DeepMind 12 User Manual
T-RayDelay (TEL-RAY DELAY)
No DM12 REF PARAMETER
1* MIX Mix
2* DLY Delay
3* SUS Sustain
4* WOB Wobble
5* TON Tone
DecimDelay (Decimator Delay)
No DM12 REF PARAMETERS
1 MIX Mix
2 TIM Time
3 DSM Downsample
4 FCL FactorL
5 FCR FactorR
6 BRC Bit-Reduce
7 FC Cutoff
8 RES Resonance
9 FLT Type
10 FBL FeedL
11
FBR FeedR
12 DMT Decimate
UNITS MIN MAX
% 0.0% 100%
% 0.0% 100%
% 0.0% 100%
% 0.0% 100%
% 0.0% 100%
UNITS MIN MAX
% 0.00% 100.00%
Ms 1.0 ms 1500.0 ms
% 0.00% 100.00%
— — —
— — —
— 24 1
Hz 30.0 Hz 20000.0 Hz
% 0.00% 100.00%
— — —
% 0.00% 100.00%
% 0.00% 100.00%
— — —
DESCRIPTION
Controls the mix (or ratio) of wet (processed) and dry (unprocessed) signals.
Adjusts the master delay time.
Controls how long the delay is sustained for. Warning at 100% build up will occur.
Adjusts the amount of wobble caused by age and quality of build/materials.
Controls the tone of the delays.
DESCRIPTION
Controls the mix (or ratio) of wet (processed) and dry (unprocessed) signals.
Adjusts the master delay time. Time synchronized options from 4 to 1/64 bars.
Decimates the signal by reducing the sampling frequency.
Sets left delay to rhythmic fractions of the master delay (1/4, 3/8, 1/2, 2/3, 1, 4/3, 3/2, 2, 3).
Sets right delay to rhythmic fractions of the master delay (1/4, 3/8, 1/2, 2/3, 1, 4/3, 3/2, 2, 3).
Decimates the signal by reducing the bit-depth.
Adjust the cutoff frequency of the fi lter, allowing specifi c frequencies to be aff ected
by the delay.
Adjusts the resonance of the fi lter.
It sets the fi lter type (Lowpass, Highpass, Bandpass, Notch).
Controls the amount of feedback for the left channel.
Controls the amount of feedback for the right channel.
It sets the decimation on the input signal (PRE) or only on the delay (POST).