Behringer DEEPMIND 12 User Manual page 86

86 DeepMind 12 User Manual
RoomRev (ROOM REVERB)
No DM12 REF PARAMETER
1 PRE PreDelay
2* DCY Decay
3 SIZ Size
4* DMP Damping
5 DIF Diff usion
6* MIX Mix
7* LC LoCut
8* HC Hi Cut
9* LFX BassMult
10 SPR Spread
11* SHP Shape
12 SPI Spin
VintageRev (VINTAGE ROOM REVERB)
No DM12 REF PARAMETER
1 PRE PreDelay
2 SIZ Size
3* DCY Decay
4* LFX Lo Mult
5* HFX Hi Mult
6* DEN Density
7* LC LoCut
8* HC Hi Cut
9* ERL ER Level
10 ERD ER Delay
11* MIX Mix
12* FRZ Freeze
UNITS MIN MAX
ms 0.0 200.0 ms
s 0.3 s 28.9 s
m 4.0 m 76.0 m
Hz 1000 Hz 20000 Hz
% 0.0% 100%
% 0.0% 100%
Hz 10.0 Hz 500.0 Hz
Hz 200.0 Hz 20000.0 Hz
-- 0.2 4.0
-- 0.0 50.0
-- 0.0 250.0
% 0.0% 100%
UNITS MIN MAX
ms 0.0 200.0 ms
% 1.0% 100%
s 0.1 s 20.7 s
-- 0.1 10.0
-- 0.1 10.0
% 0.0% 100%
Hz 10.0 Hz 500.0 Hz
Hz 200.0 Hz 20000.0 Hz
% 0.0% 100%
ms 0.0 200.0 ms
% 0.0% 100%
-- OFF ON
DESCRIPTION
Controls the amount of time before the reverb is heard following the source signal.
Controls the amount of time it takes for the reverb to dissipate.
Controls the perceived size of the space being created by the reverb.
Adjusts the decay of the high frequencies within the reverb tail.
Controls the initial refl ection density.
Controls the mix (or ratio) of wet (processed) and dry (unprocessed) signals.
Allows the low frequencies aff ected by the reverb to be reduced.
Allows the high frequencies aff ected by the reverb to be reduced.
Controls the low frequency build-up.
Emphasizes the stereo eff ect of the reverb.
Adjusts the contour of the reverberation envelope.
Controls randomization / modulation eff ects within the reverb.
DESCRIPTION
Controls the amount of time before the reverb is heard following the source signal.
Controls the perceived size of the space being created by the reverb. Aff ects DECAY range.
Controls the amount of time it takes for the reverb to dissipate. Range dependant on SIZE.
Controls the low frequency build-up.
Controls the high frequency build-up.
Manipulates the refl ection density in the simulated room.
Allows the low frequencies aff ected by the reverb to be reduced.
Allows the high frequencies aff ected by the reverb to be reduced.
Set the early refl ection times.
Sets the loudness of the early refl ection level.
Controls the mix (or ratio) of wet (processed) and dry (unprocessed) signals.
Applies freeze mode and blends signals into a continuous response.