Configuration Edit/Display - Paradyne HOTWIREt 7984 User Manual

Initial Startup and Configuration

Configuration Edit/Display

Î
Î
3-12
The Configuration Edit/Display screen is displayed when the current, customer, or
default configuration is loaded. To access the Configuration Edit/Display screen,
follow this menu selection sequence:
Main Menu Configuration
– or –
Main Menu Configuration
main/config/edit
–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
Ctrl-a to access these functions, ESC for previous menu
Save
See Appendix A, Configuration Option Tables
configuration options available.
Select . . . To Access the . . .
Network Network Interface
DSX-1 DSX-1 Interface
System System
Options
Communication Communication Port
Port
Management Telnet Session
and
Communication Protocol
Communication
Table A-6
General SNMP Management
Options, Table A-7
SNMP NMS Security
Table A-8
SNMP Traps
February 1999
Current Configuration
Default Factory Configuration
CONFIGURATION EDIT/DISPLAY
Network
DSX-1
System Options
Communication Port
Management and Communication
, for a list and explanation of the
Options, Table A-1
Options, Table A-2
Options, Table A-3
Options, Table A-4
Options, Table A-5
Options,
Options,
Options, Table A-9
Hotwire
Model: 7984
Î Î
Î Î
MainMenu Exit
To Configure the . . .
DSL network interface on
the unit.
DSX interface.
General system options of
the unit.
Unit's COM port options.
Management support of the
unit through SNMP and
Telnet.
7984-A2-GB20-10