Test Status - Paradyne HOTWIREt 7984 User Manual

Monitoring the Unit

Test Status

4-6
The Test Status messages in the following table appear in the right column of the
System and Test Status screen.
Table 4-3. Test Status Messages
Test Status Message Meaning
No Test Active No tests are currently running.
LLB Test Active, Pt 1 A network Line Loopback test is active on Port 1.
DLB Test Active, Pt 1 A Data Terminal Loopback test is active on Port 1.
RLB Test Active, Pt 1 A Repeater Loopback test is active on Port 1.
511 Test Active, Pt 1 A 511 Test and Monitor is active on the DSL Port 1 network
interface.
Lamp Test Active The Lamp Test is active, causing the LEDs on the front panel to
light.
Telco LLB Active, Pt1 A line loopback is active on DSX-1 Port 1.
For further information on testing, refer to Chapter 5,
February 1999
Testing .
7984-A2-GB20-10