Snmp Traps - Paradyne HOTWIREt 7984 User Manual

Index
D
dc power option, 3-2
default configuration area, 3-6
delete, Login ID, 7-4
device, messages, 6-3– 6-4
dimensions, D-1
Disconnect Time
for Telnet session, A-12
for terminal session, A-10
documents, related, vi
DOS, TFTP server on, 3-13
download code, 3-16
Download Failed, status message, 4-4
DSL Line Rate, 3-10
Network Interface Options screen, A-3
switch setting, 3-10
DSL Port, LEDs, 4-13
DSLAM, defined, 1-2
DSX-1, LED, 4-13
DSX-1 Failed, self-test result, 4-5
DSX-1 Interface Options, A-4
DTE loopback , 5-5
E
EER (Excessive Error Rate) , status message, 4-3
effective access level, 7-1
ending an ATI session, 2-9
enterprise, SNMP traps, B-3
environment requirements, D-1
error messages, line 24, 6-3
error statistics, 4-7
ESD precautions, 3-7
Excessive Error Rate (EER) Threshold, A-2
F
factory default configuration options, resetting, 7-5
factory defaults, 3-6
Failure, self-test result, 4-5
feature numbers, D-1
features, 1-1
firmware
download from server, 3-16
select with switch, 3-10
Front Panel LEDs, 1-4
function keys, 2-7
IN-2
G
General SNMP Management Options, A-16
H
health and status messages, 4-3
I
identity, 3-4
inactivity timeout
for Telnet session, A-12
for terminal session, A-10
Initial Startup and Configuration, 3-1
intended audience, v
internal switches, 3-7
IP address
determining, 8-1
DSL peer, A-3
example, 8-2
node, A-14
SNMP manager, 7-5
K
keyboard functions, 2-6
L
lamp test, 5-8
LEDs, 4-12, 4-13
Line Coding Format, A-5
Line Equalization, A-5
Line Framing , A-4
Link Up, LEDs, 4-13
link-layer protocols, 8-1
linkUp and linkDown traps, B-2
local line loopback (LLB), 5-3
LOF (Loss Of Frame), status message, 4-3
Login ID
access levels, 7-1
adding, 7-2
deleting, 7-4
loopback, effect on LEDs, 4-13
LOS (Loss Of Signal), status message, 4-3
February 1999 7984-A2-GB20-10