About The Hotwire 7984 Standalone Termination Unit; M/Hdsl Overview; Hotwire 7984 Termination Unit Features - Paradyne HOTWIREt 7984 User Manual

About the Hotwire 7984
Standalone Termination Unit

M/HDSL Overview

Hotwire 7984 Termination Unit Features

7984-A2-GB20-10
Hotwire Multirate High-bit-rate Digital Subscriber Line (M/HDSL) products
maximize customer service areas by varying the DSL line rate. This ensures
symmetric DSL connectivity over a wide range of telephone line distances and
transmission line qualities.
Hotwire products can transport at full (2.048 Mbps) or fractional payload rates
over a 4-wire, full-duplex circuit over varying distances based on the conditions of
the 4-wire loop. Examples include support for router, multiplexer and PBX
connections on 24 gauge (.5 mm) cable up to 21,000 feet (6.4 km).
Hotwire M/HDSL is equipped with an automatic configuration capability that
reduces the M/HDSL installation process to a simple plug and play mode. Simply
connecting the units to the line automatically configures the customer for the
maximum data rate supported by the local loop. M/HDSL units can also be
configured at fixed line speeds to achieve maximum distances.
The Hotwire 7984 M/HDSL Standalone Termination Unit is an endpoint for the
chassis-mounted Hotwire 8784 M/HDSL Termination Unit housed in the Hotwire
8600 or 8800 Digital Subscriber Line Access Multiplexer (DSLAM).
Two Hotwire 7984 M/HDSL Standalone Termination Units can also be configured
to operate in a central office LTU to customer premises NTU environment.
The 7984 Standalone Termination Unit offers these standard features:
Embedded Operations Channel (EOC). Provides remote SNMP Traps,
Telnet session capability over the M/HDSL link, and download capabilities.
Asynchronous Terminal Interface (ATI). Provides a menu-driven
VT100-compatible terminal interface for configuring and managing the
termination unit locally or remotely by Telnet session.
February 1999
1
1-1