Switching Between Screen Work Areas - Paradyne Hotwire 7975 User Manual

Using the Asynchronous Terminal Interface

Switching Between Screen Work Areas

"
Î
Î
2-8
Select Ctrl-a to switch between the two screen work areas to perform all screen
functions.
Procedure
To access the screen function area below the dotted line:
1. Press Ctrl-a to switch from the screen area to the screen function key area
below the dotted line.
2. Select either the function's designated (underlined) character or press the
Tab key until you reach the desired function key.
Example:
To save the current screen, type s or S ( Save).
3. Press Enter.
4. To return to the screen area above the dotted line, press Ctrl-a again.
main/config/network
Margin Threshold:
Excessive Error Rate Threshold:
AutoRate
DSL Line rate
Peer IP Address:
Circuit Identifier:
––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
Ctrl-a to access these functions, ESC for previous menu
Save
December 1998
NETWORK INTERFACE OPTIONS
Hotwire
Model: 7975
–3db
1E–5
Disable
144
111.255.255.000 Clear Î Î
Î Î
Clear
MainMenu Exit
7975-A2-GB20-40