Ending An Ati Session - Paradyne Hotwire 7975 User Manual

Ending an ATI Session

"
7975-A2-GB20-40
Use the Exit function key from any screen to terminate the session.
Procedure
To end a session with the asynchronous terminal interface:
1. Press Ctrl-a to go to the screen function key area below the dotted line.
2. Save changes if required. A confirmation message appears if you have made
but not saved changes to your configuration.
3. Tab to Exit (or type e or E) and press Enter.
December 1998
Using the Asynchronous Terminal Interface
2-9