Creating A Login - Paradyne Hotwire 7975 User Manual

Security

Creating a Login

"
Î
Î
Î
Î
7-2
Access level is also used to control access via Telnet. If the Telnet Session
Access Level is set to Administrator (see Table A-5,
Login ID with an Operator access level is not permitted access.
Logins apply to the terminal directory connected to the communication port or
Telnet access directly to the ATI of the 7975 Standalone Termination Unit.
Six login ID/password combinations are available. Each Login ID and Password
must be unique and include an access level.
Procedure
1. To create a login record, follow this menu selection sequence:
Main Menu Control
main/control/admin_logins
––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
Save PgUp PgDn
2. Select Newuser and press Enter. The Login Entry screen is displayed.
main/control/admin_logins
Slot: 4
New logins will not become permanent until saved
through the "ADMINISTER LOGINS" screen!
––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
Ctrl-a to access these functions
Save
December 1998
Administer Logins
ADMINISTER LOGINS
Login ID: newuser
Access Level: Administrator
Are you sure? Yes
ESC for previous menu
LOGIN ENTRY
Login ID:
Password:
Re-enter Password:
Access Level:
WARNING
ESC for previous menu
Telnet Session Options), a
Hotwire
Model: 7975
Page 1 of x
MainMenu Exit
New Delete
Hotwire
Model: 7975
newuser2
es342
es342
Administrator
MainMenu Exit
7975-A2-GB20-40
Î Î
Î Î
Î Î
Î Î