H Hotwire 7975 Features; Health And Status - Paradyne Hotwire 7975 User Manual

About the Hotwire 7975 Standalone Termination Unit
Hotwire 7975 Features
1-2
The Hotwire 7975 M/SDSL Standalone Termination Unit is an endpoint for the
chassis-mounted Hotwire 8775 M/SDSL Termination Unit housed in the Hotwire
8600 or 8800 Digital Subscriber Line Access Multiplexer (DSLAM).
Two Hotwire 7975 M/SDSL Standalone Termination Units can also be configured
to operate in a central office (CO) to customer premises (CP) environment.
The 7975 Standalone Termination Unit offers these standard features:
H
AutoRate Capability. Provides automatic configuration of line speed and
data rate upon connection.
H
Embedded Operations Channel (EOC). Provides remote SNMP Traps or
Telnet session capability over the M/SDSL network.
H
Asynchronous Terminal Interface (ATI). Provides a menu-driven
VT100-compatible terminal interface for configuring and managing the
termination unit locally or remotely by Telnet session.
H
Local Management. Provides local management using a:
— Terminal or PC via the COM port of the unit
— NMS connection through the 10BaseT port
H
Remote Management. Provides remote management using:
— Terminal or PC via the Management Serial port of the DSLAM
— Network Management System (NMS) via the COM port or MCC port of
the DSLAM
— Telnet over the EOC
— External modem out-of-band
— Using SNMP or Telnet through the 10BaseT port or the Internal
Management Channel (IMC).
H
Alarm Indication. Provides front panel status LEDs.
H
Diagnostic Testing. Provides the capability to diagnose device and network
problems and perform tests, including digital loopbacks, pattern tests, and
self-test.
H
Device and Performance Monitoring. Provides the capability of tracking
and evaluating the unit's operation, including health and status, and error-rate
monitoring.
December 1998 7975-A2-GB20-40