H Configuring Autorate - Paradyne Hotwire 7975 User Manual

Configuring AutoRate
Î
Î
"
7975-A2-GB20-40
The M/SDSL AutoRate function is controlled from the Network Interface Options
screen and allows you to enable or disable AutoRate from a unit configured as an
LTU. To access the Network Interface screen, follow this menu selection
sequence:
Main Menu Configuration
main/config/network
Margin Threshold:
Excessive Error Rate Threshold:
AutoRate
DSL Line Rate
Circuit Identifier:
––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
Ctrl-a to access these functions, ESC for previous menu
Save
Procedure
The AutoRate option is defaulted to Enable. To disable AutoRate:
1. Position the cursor in the AutoRate field and press the spacebar.
The AutoRate field toggles to Disable and the DSL Line Rate field displays.
2. Enter a DSL Line Rate and press Enter.
Your payload rate is set to a default value determined by your LTU DSL Line
Rate. Use Table 3-5,
your DSL Line Rate and Payload Rate.
December 1998
Network
NETWORK INTERFACE OPTIONS
Fixed Rate Payload Rates and DSL Line
Initial Startup and Configuration
Hotwire
Model: 7975
–3db
1E–5
Disable
144
Clear
MainMenu Exit
Rates, to set
Î Î
Î Î
3-13