Table of Contents
Advertisement
Related
Documentation
Validating the Branch SRX Series Configuration
Purpose
Action
Copyright © 2016, Juniper Networks, Inc.
Understanding Factory Default Configuration Settings of an SRX210 on page 7
Connecting the Branch SRX Series Through the Console Port for the First Time on
page 19
Configuring a Hostname to Identify a Branch SRX Series Services Gateway in Your
Network on page 20
Validating the Branch SRX Series Configuration on page 23
Verifying the Branch SRX Series Configuration on page 24
Verify that the device was configured with a hostname, user classes, name server, and
an NTP server.
From configuration mode, confirm your configuration by entering the
such as
show system host-name
shown in the following samples:
Verify system hostname details.
[edit]
root@host# show system host-name
host-name srx210-host;
Verify system user classes and login details.
[edit]
root@host# show system login
user admin-user {
class super-user;
authentication {
encrypted-password "$ABC123"; ## SECRET-DATA
}
}
user read-only-user {
class read-only;
authentication {
encrypted-password "$A1B1C1"; ## SECRET-DATA
}
}
Verify system name server details.
[edit]
root@host# show system name-server
208.67.222.222;
208.67.220.220;
10.11.11.11
Use
run show interface terse
If you are done configuring the device, enter
Chapter 3: Configuring an SRX Series Device for the First Time
,
, and
show system login
to verify the acquired IP address.
from configuration mode.
commit
show
commands
show system name-server
as
23
Advertisement
Table of Contents
