Table of Contents
Advertisement
About the Documentation
Documentation and Release Notes
Supported Platforms
Using the Examples in This Manual
Copyright © 2016, Juniper Networks, Inc.
Documentation and Release Notes on page xi
Supported Platforms on page xi
Using the Examples in This Manual on page xi
Documentation Conventions on page xiii
Documentation Feedback on page xv
Requesting Technical Support on page xv
To obtain the most current version of all Juniper Networks
see the product documentation page on the Juniper Networks website at
http://www.juniper.net/techpubs/
If the information in the latest release notes differs from the information in the
documentation, follow the product Release Notes.
Juniper Networks Books publishes books by Juniper Networks engineers and subject
matter experts. These books go beyond the technical documentation to explore the
nuances of network architecture, deployment, and administration. The current list can
be viewed at
http://www.juniper.net/books
For the features described in this document, the following platforms are supported:
SRX Series
If you want to use the examples in this manual, you can use the
merge relative
command. These commands cause the software to merge the incoming
configuration into the current candidate configuration. The example does not become
active until you commit the candidate configuration.
If the example configuration contains the top level of the hierarchy (or multiple
hierarchies), the example is a full example. In this case, use the
®
.
.
technical documentation,
or the
load merge
load
command.
load merge
xi
Advertisement
Table of Contents
