Table 12: Show Security Flow Session Output Fields - Juniper Junos OS Getting Started Manual

Getting Started Guide for Branch SRX Series
Required Privilege
Level
Related
Documentation
List of Sample Output
Output Fields

Table 12: show security flow session Output Fields

Field Name
Session ID
Policy name
Timeout
In
110
—IP protocol number
protocol
—Resource manager
resource-manager
—Display root logical system as default
root-logical-system
security-intelligence —Display security intelligence sessions
—Display services offload sessions
services-offload
session-identifier —Display session with specified session identifier
—Source port
source-port
source-prefix —Source IP prefix
—Display output summary
summary
tunnel —Tunnel sessions
brief | extensive | summary—Display the specified level of output.
none—Display information about all active sessions.
view
Juniper Networks Devices Processing Overview
clear security flow session all
show security flow session on page 112
show security flow session brief on page 112
show security flow session extensive on page 113
show security flow session summary on page 113
Table 12 on page 110 lists the output fields for the
Output fields are listed in the approximate order in which they appear.
Field Description
Number that identifies the session. Use this ID to get more information about the session.
Policy that permitted the traffic.
Idle timeout after which the session expires.
Incoming flow (source and destination IP addresses, application protocol, interface,
session token, route, gateway, tunnel, port sequence, FIN sequence, FIN state, packets
and bytes).
show security flow session
Copyright © 2016, Juniper Networks, Inc.
command.