Table of Contents
Advertisement
show security flow session
Syntax
Release Information
Description
Options
Copyright © 2016, Juniper Networks, Inc.
show security flow session
[filter ] [brief | extensive | summary ]
Command introduced in Junos OS Release 8.5. Support for filter and view options added
in Junos OS Release 10.2. Application firewall, dynamic application, and logical system
filters added in Junos OS Release 11.2. Policy ID filter added in Junos OS Release
12.3X48-D10.
Display information about all currently active security sessions on the device.
filter—Filter the display by the specified criteria.
The following filters reduce the display to those sessions that match the criteria
specified by the filter. Refer to the specific
output.
—Predefined application name
application
—Application firewall enabled
application-firewall
application-firewall-rule-set
application-traffic-control
application-traffic-control-rule-set
name
destination-port
—Destination port
—Destination IP prefix or address
destination-prefix
dynamic-application
—Dynamic application
dynamic-application-group
encrypted
—Encrypted traffic
—Display detailed output
extensive
family
—Display session by family
—IDP enabled sessions
idp
—Name of incoming or outgoing interface
interface
logical-system (all | logical-system-name)
display all logical systems
—Display sessions with network address translation
nat
policy-id
—Display session information based on policy ID; the range is 1 through
4,294,967,295
command for examples of the filtered
show
—Application firewall enabled with the specified rule set
—Application traffic control session
—Application traffic control rule set name and rule
—Dynamic application
—Name of a specific logical system or
Chapter 12: Operational Commands
all
to
109
Advertisement
Table of Contents
