Table of Contents
Advertisement
Getting Started Guide for Branch SRX Series
Default System Services
Autoinstallation
Related
Documentation
SRX210 Factory Default Settings—A Sample
10
Table 5 on page 10
provides outbound Internet access using source NAT with port address
translation, permitting traffic from the trust zone to the untrust zone.
Table 5: Default NAT Settings
Source Zone
Destination Zone
Trust
Untrust
See
"SRX210 Factory Default Settings—A Sample" on page 10
configuration of the device.
The following system services are enabled by default on a branch SRX Series:
DHCP
FTP
HTTP
HTTPS
SSH
Telnet
xnm-clear-text
Autoinstallation provides automatic configuration for a new device that you connect to
the network. Autoinstallation is active by default and is deactivated when you commit
the device for the first time.
You can use the
delete system autoinstallation
For more details on Autoinstallation, see Installation and Upgrade Guide for Security
Devices.
SRX Series Overview on page 3
SRX210 Factory Default Settings—A Sample on page 10
Understanding Methods to Manage the Branch SRX Series on page 17
The following sample output shows the factory default configuration of an SRX210:
[edit]
user@srx210-host# show system
system {
autoinstallation {
Policy Action
Source NAT to the untrust zone interface
to view the factory default
command to delete autoinstallation.
Copyright © 2016, Juniper Networks, Inc.
Advertisement
Table of Contents
