Table of Contents
Advertisement
Getting Started Guide for Branch SRX Series
Related
Documentation
Verifying the Branch SRX Series Configuration
Purpose
Action
24
Understanding Factory Default Configuration Settings of an SRX210 on page 7
Configuring a Hostname to Identify a Branch SRX Series Services Gateway in Your
Network on page 20
Configuring Internet Access for the Branch SRX Series on page 21
Configuring a Network Time Protocol Server for the Branch SRX Series on page 22
Verifying the Branch SRX Series Configuration on page 24
Verify that your SRX Series configuration is working properly.
From configuration mode, confirm your configuration by entering the
dhcp client
command.
Verify DHCP client configuration.
user@srx210-host>
show system services dhcp client ge-0/0/0.0
Logical Interface Name
Hardware address
Client Status
bound
Address obtained
1.1.1.20
update server
enables
Lease Obtained at
Lease Expires at
2007-05-11 18:16:04 PST
DHCP Options:
Name: name-server, Value: [ 1.1.1.2 ]
Code: 1, Type: ip-address, Value: 255.255.255.0
Name: name-server, Value: [11.11.11.11]
Name: domain-name, Value: dept.example.net
Verify the Internet connection on your SRX Series.
To verify the connectivity from your device, ping to the gateway and DNS from your
SRX Series to verify the connectivity.
To verify that your SRX Series is connected and everything is working properly, access
http://www.juniper.net/techpubs/
connected to the Internet.
Verify that the login classes you have created are working properly.
Log out from the device and log in again using the credentials that you have configured
for the newly created user classes.
Verify NTP server details.
user@srx210-host#
show system ntp
server 160.90.182.55;
ge-0/0/1.0
00:12:1e:a9:7b:81
2007-05-10 18:16:04 PST
or other Web destinations to ensure that you are
show system services
Copyright © 2016, Juniper Networks, Inc.
Advertisement
Table of Contents
