Check All Connections - Ricoh D009 Service Manual

Other Options
2. Insert the Gigabit Ethernet Board into the I/F slot and fasten it with the screws.
3. Print a configuration page to confirm that the machine recognizes the installed board
for USB2.0:
User Tools > Printer Features > List/Test Print > Configuration Page

1.3.8 CHECK ALL CONNECTIONS

Plug in the power cord. Then turn on the main switch.
Enter the printer user mode. Then print the configuration page.
User Tools > Printer Settings > List Test Print > Config. Page
All installed options are shown in the "System Reference" column.
D381 22 SM