Disassembly
1. Separation of Front and Rear Bodies
Bottom Cover
・ Take out the four screws (#5735)
and five screws (#5674).
・ Open the power-wire lid.
Open the power-wire lid.
・ Remove the bottom cover.
Power-wire lid
Rear cover
・Take out the four screws (#6690) and two screws (#5618).
・Remove the rear cover.
Note: Remove the rear cover slowly so as not to cut the rear FPC
of the lower portion of the cover.
・Remove the rear FPC from the connector.
#6690×4
Rear FPC
#5674
#5674
#5735
#5674
- D ・
#5674×2
#5735×2
#5618×2
-
logo_Q0650_forGraphic
071004_Gdesign_ito
INC
VBA21001-R.3753.A
#5735
Bottom cover
Rear cover