Reading Of Risc Version; Tft Adjustment; Flicker Adjustment; Hue Adjustment/Brightness Adjustment - Nikon D60 Repair Manual

Hide thumbs Also See for D60:

Table of Contents

INC

VBA21001-R.3753.A

7-5. Reading of RISC version

　・Click "RISC VERSION" of the menu on screen.

　・RISC version is displayed.

　・Click "TFT ADJUSTMENT" on the menu.

　Writing of TFT fixed values

　・Click "REWRITING THE TFT FIXED VALUE".

　・The message "Will you rewrite the CAMERA?" appears.

　・Click "Yes".

　・Writing is completed.

　・Click "OK".

　・Usually default value is set and adjustment is not necessary.

　・If flicker is recognized by visual check, adjust by the slider so that no flicker is visible.

　・Remove the USB cable from the camera, then remove the AC adapter without turning the camera OFF.

　Hue adjustment

　・Usually default value is set and adjustment is not necessary.

　・If some problem is found with hue by visual check, adjust and correct it by the slider.

　・Remove the USB cable from the camera, then remove the AC adapter without turning the camera OFF.

　Brightness adjustment

　・Usually default value is set and adjustment is not necessary.

　・If some problem is found with brightness by visual check, adjust and correct it by the slider.　

　・Remove the USB cable from the camera, then remove the AC adapter without turning the camera OFF.

- Ａ･

logo_Q0650_forGraphic

071004_Gdesign_ito

Table of Contents

Show Quick Links

Table of Contents