Inspection Standards Table - Nikon D60 Repair Manual

Inspection standards
Items
External view
Step
(height difference)
Clearance
Size / Force
Shutter release button
Aperture lever
Main mirror
Sub-mirror
Finder ∞ Infinity
focus
Judgment standard
Between top cover and apron: 0.2 mm or less
Other parts: 0.3 mm or less; Inside elements must not be seen.
Moving parts: 0.5 mm or less
from Top cover to Apron; to rear cover: 0.2 mm or less
from Bottom cover to Apron; to rear cover: 0.2 mm or less
When SB is housed, from SB upper case to Top cover; to
Apron: 0.5 mm or less
Other parts: 0.3 mm or less; Inside elements must not be
seen.
Moving parts: 0.5 mm or less
Protrusion: .05 ± 0.2 mm
Halfway pressing force: 100 ± 50 g
Halfway pressing stroke: 0.5 ± 0.2 mm
Releasing force: 260 ± 70 g
Releasing stroke: 0.7 ± 0.25 mm
Full stroke: 0.6 mm or more
Difference btwn Half-releasing and Full pressing force:
5 g or more
+0.20
Height: 3.4 + mm
- 0.0
45 ゜ angle: Up-down ± 0'
Right-left ± 30'
Distortion: 6' or less
Clearance for up-mirror in mirror box: None
47.75 ゜ angle: Up-down
Collimator measurement value: 0'
Distortion: 8' or less
±100μm
- R ･ -
+20'
- 45'
logo_Q0650_forGraphic
071004_Gdesign_ito
INC
VBA21001-R.3753.A
Remarks
Visual check
Digital micrometer
Digital micrometer
Tension gauge
3.4 height gauge
Collimator
Main mirror tool
Visual check
Feeling in hand
Sub-mirror tool
Collimator
∞ focus lens