Nikon D60 Repair Manual page 41

SB PCB
・Fit the SB-PCB with the boss, and fix it with the screw (#687).
・Solder the two wires (connected from DC/DC-PCB) and put them in the
groove for arrangement.
・Adhere the main condenser unit with the adhesive double-coated tape by
putting in the direction for positioning.
・Solder the two wires of the main condenser.
SB-PCB
Bosses
Groove
#687
Black:DC/DC-PCB
Red:DC/DC-PCB
The edges of [#1043] and [#140]
must be aligned.
- Ａ  ･
Black:SB-PCB
#1043
Positioning
-
logo_Q0650_forGraphic
071004_Gdesign_ito
INC
VBA21001-R.3753.A
Main condenser unit
#142
#1076
#1077
#140
#141×2
#1043
Red:SB-PCB
Main condenser
#1043
#142
#140
Direction for positioning