Nikon D60 Repair Manual page 84

Items
Viewfinder
In-finder LCD
position
Finder field frame
Field of viewfinder
(frame coverage)
Parallax
(Difference in position
from CCD center)
Eye point
Battery life Professional mode
Room temperature: 2500 frames or more
EN-EL9
0℃ :
・Setting
・Lens: AF-S 8-55/3.5-5.6G , AF-S 8-55/3.5-5.6G Ⅱ
・Operation: Halfway press for 3 sec. → AF-scan reciprocating motion 3 times → Continuous releases 6 times → TFT
playback for 5 sec.→ Half-release timer OFF waiting for 6 sec.
General mode
Room temperature: 500 frames or more
・Setting
・Lens: AF-S 8-55/3.5-5.6G , AF-S 8-55/3.5-5.6G Ⅱ
・Operation: Repeat the following the odd-numbered shots and even-numbered shots until the number of exposures
Judgment standard
Tilt from finder screen: 1°or less
Tilt: (Right-left tilt from the lower part of finder field frame):
90' 0.5 or less
± °
Relative angle to image sensor: 30'or less
In height and width: 95
±
Up-down: 0.5 mm or less
Right-left: 0.5 mm or less
No vignetting
-
-  m equivalent position [ click from Minus-end]
: 900 frames or more
ISO00, Exposure mode: M, /250 sec., F6, AF-C, operation mode: C, Illuminated surface: LV2, Image
quality: BASIC, Image size: M, White balance: A,
Halfway press→ Card format → Repeat the below "Operation" → Remove the card when the no. of
exposures remaining becomes "0" → Card format →...
0℃ : 400 frames or more
ISO00, Exposure mode: M, /60 sec., F6, AF-C, operation mode: S, Illuminated surface: LV2, Image
quality: NORM, Image size: L, White balance: A,
Halfway press→ Card format → Repeat the below "Operation" → Remove the card when the no. of
exposures remaining becomes "0" → Card format →...
remaining becomes "0". Switch power OFF for  min. each time 0 frames are shot.
Shots Odd-numbered shots
Repeat ① Halfway press 5 sec.
operation
② AF scan reciprocating motion once
MENU ① - ⑤ .
③ Release... Built-in SB full flash
④ LCD monitor playback 4 sec.
⑤ Half-release timer OFF waiting 6 sec.
※ Activate the flash of AF-assist illuminator.
- R3 ･ -
3 %
: 7.9mm±0%
Even-numbered shots
① Halfway press 5 sec.
② AF scan reciprocating motion once
③ Release... Built-in SB full flash
④ LCD monitor playback 4 sec.
⑤ Half-release timer OFF waiting 6 sec.
※ Do NOT activate the flash of AF-assist illumi-
logo_Q0650_forGraphic
071004_Gdesign_ito
INC
VBA21001-R.3753.A
Remarks
Visual check
Shoot the finder
field frame with
the 0.2-mm-or-less
tilt of optical axis
from the viewfinder
eyepiece optical
axis, and measure
the angle.
AF50/.4D, F5.6
Measure a difference
in the center btwn
the marked finder
field and actual shot
object.
Eye point tool
Vernier caliper
nator.