INC
VBA21001-R.3753.A
SQ PCB unit
・Move the roller section of the aperture control unit to the position as shown in Fig. ① .
・Turn " 1" all the way to the end in the direction of the arrow. Then, Press " 2" in the direction of "Lock".
・Turn " 3", and insert the roller section between [#207] and [#203].
・Tighten the three screws (#638).
・Press " 2" in the direction of "Unlock".
Note: Be careful not to bend contact blade of F-min SW.
Aperture control unit
Fig. ①
Lock
1
2
Unlock
Roller section
#208
3
#638×3
SQ PCB unit
#207
#203
#253
- A ・
-
logo_Q0650_forGraphic
071004_Gdesign_ito