Relay-PCB unit
・ Mount the relay-PCB unit (#1004) in the direction for positioning, and fix it with the screw (#607).
・ Arrange the wires as shown in "Fig. ① ".
・ Solder the five wires (connected from
SB-PCB, TOGO PCB, and SQ PCB unit).
Relay-PCB
Front body FPC unit
・ Attach the front body-FPC (#1009), and connect it to the connector of the relay-PCB unit.
・ Attach the SI diffusing plate (#279) and SI-LCD FPC (#1011) .
・ Mount the SB SW unit (#B1012).
・ Make the three solder bridges.
#278×2
#1011
#607
Direction for positioning
Red:SQ PCB unit
Black:SQ PCB unit
Front body FPC
#279
#1009
- A ・
Red:SB PCB
Pink:TOGO PCB
Black:SB PCB
Arrange around bosses.
SB SW unit (#B1012)
-
logo_Q0650_forGraphic
071004_Gdesign_ito
INC
VBA21001-R.3753.A
Through the hole
Fig. ①
Solder bridge ×3
Relay-PCB