Sb Pop-Up - Nikon D60 Repair Manual

SB pop-up

・Cut the tracing film sheet, etc into the below size of piece.
Then insert it into the clearance of the top cover pop-up
part as shown right, and raise the SB by sliding the sheet in
the direction of the arrow.
Approx. 4cm
Covers
・Take out the four screws (#5610) and
the screw (#626).
・Remove the front cover unit (#B24) and
[#131].
(Be careful not to drop [#131].)
Approx. 2cm
警告
WARNING
Due to an internal high voltage area, take extra care not to get an
内部に高電圧部あり。カバーを外す時は感電に注意すること。
electric shock when detaching covers.
カバーを外した後は、修理指針の指示に従ってメインコンデン
After removing the covers, be sure to discharge the main
サーの放電を必ず行うこと。
condenser according to the instructions of repar manuals.
#626
#750×2
#131
- Ｄ  ･
#5610×2
Adhesive: Super X
#670
Adhesive: AlonAlfa
(Quick drying glue)
-
logo_Q0650_forGraphic
071004_Gdesign_ito
INC
VBA21001-R.3753.A
#B24
Adhesive: Super X
#6074
#5120
#5610×2
#792C
#29
#26