Bayonet; Mount Gnd Plate; Height Adjustment Of Aperture Lever - Nikon D60 Repair Manual

Bayonet

Mount GND plate

・ Put [#135] and fix it with the screw (#607).
・ Attach [#137].
・ Attach three pieces [#112].
・ Mount the bayonet (#111).
・ Tighten the screw (#660) and five screws (#648)
in the order from to
①

Height adjustment of Aperture lever

・Measure the height of the aperture lever by using the tool (J18004).
Standard: 3.45 ± 0.15 mm
In case the value is out of standard, make an adjustment by bending the aperture lever.
Be careful NOT to bend the inner part of the lever when adjusting.
.
⑥
Height of Aperture lever
3.45 ± 0.15 mm
- Ａ  ･
#135
#607
②
#112×3
④
#648×5
Aperture lever
-
logo_Q0650_forGraphic
071004_Gdesign_ito
INC
VBA21001-R.3753.A
#137
#112
Grease: LEN317A Grease: LEN317A
#111
③
⑤
⑥
#660
①