Upper Drive Shaft Bearing; Oil Sleeve - Mercury 40 Service Manual

Upper Drive Shaft Bearing

1. Replace upper drive shaft bearing and sleeve if
either are rust stained, or if bearing will not roll
freely. Remove bearing and then sleeve using
Puller Assembly (91-83165M) with suitable jaws.
c
OR
a - Upper Drive Shaft Bearing
b - Sleeve
c - Puller Assembly (91-83165M)
IMPORTANT: Upper drive shaft bearing/sleeve
must be removed prior to oil sleeve removal. Re-
fer to "Upper Drive Shaft Bearing," preceding.
90-852572R1 JANUARY 1998

Oil Sleeve

1. Remove oil sleeve (if necessary) using Puller As-
a
b
a - Oil Sleeve
19177
b - Puller Assembly (91-83165M)
IMPORTANT: Upper drive shaft bearing/sleeve
and oil sleeve do not have to be removed for low-
er drive shaft bearing race removal.
sembly (91-83165M) with suitable jaws.
b
a
19222
LOWER UNIT - 6C-15