Install Remaining Engine Components; Powerhead Installation - Mercury 40 Service Manual

Install Remaining Engine
Components
Component/Assembly
CDM
Flywheel
Stator Assembly
Trigger Assembly
Starter Motor
Starter Solenoid
Voltage Regulator/Rectifier
Fuel Pump
Carburetor and Linkage
Air Silencer
Fuel Enrichment Valve
Oil Pump
Shift Cable Latch Assembly
Control Cable Anchor Bracket
* Note: All ignition and electrical components can be
removed and installed as an assembly.
4-38 - POWERHEAD

Powerhead Installation

Section
There are two different gasket styles. Newer style
2A replaces old. Note tab on outer edge and also dif-
ferent configuration as shown on new style.
2A
Replace with same style or new style gasket.
2A
Engine damage could result with 50/55/60 gasket
2A
installed on 40/50/55/60 models.
2B
2B
2B
3A
3B
3B
3B
3C
7A
7A
40/50/55/60 Models P/N 27-828553
50/55/60 Models P/N 27-812865
DO NOT INSTALL ON 40/50/55/60 MODELS
CAUTION
40/50/55/60
90-852572R1 JANUARY 1998