6. If plunger can be compressed into accumulator
by hand, accumulator is defective. Replace accu-
mulator.
a - Plunger
7. Once accumulator is removed, remove o-ring,
conical spring, steel ball and plunger.
a - Conical Spring
b - Steel Ball
c - Plunger
d - O-ring
90-852572R1 JANUARY 1998
Shock Rod Removal
1. Unscrew cylinder end cap assembly using span-
a
2. Remove shock rod assembly from cylinder.
51143
a
b
c
d
51145
ner wrench [1/4 in. x 5/16 in. long pegs].
51145
MID-SECTION - 5F-19