Power Trim System Removal - Mercury 40 Service Manual

Power Trim System Removal

1. Tilt outboard to the full up position and support
with tilt lock pin.
a
a - Tilt Lock Pin
2. Disconnect the power trim wire harness and re-
move clamp.
a - Power Trim Wire Harness Clamp
b - Harness
90-852572R1 JANUARY 1998
3. Remove the trilobe pin.
4. Drive out the upper pivot pin.
a - Trilobe Pin
55464
b - Upper Pivot Pin
5. Remove the sacrificial anode.
a
b
a
a - Sacrificial Anode
55264
a
b
55331
MID-SECTION - 5D-27