Reverse Gear; Forward Gear - Mercury 40 Service Manual

5. Lubricate O-ring with Special Lubricant 101. In-
stall O-ring.
95
95 2-4-C w/Teflon (92-850736A1)
a - O-ring

Reverse Gear

1. Lubricate I.D. of bearing with Quicksilver Needle
Bearing Assembly Lubricant. Use Installer Tool
and press onto gear until bearing bottoms.
b
4
Needle Bearing Assy. Lub. (92-825265A1)
4
a - Bearing
b - Installer Tool (91-817007)
6B-22 - LOWER UNIT
2. Install reverse gear and bearing assembly. Lubri-
cate O.D. of bearing with Quicksilver Needle
Bearing Assembly. Lubricant before installation.
a
51263
4
Needle Bearing Assy. Lub. (92-825265A1)
4
a - Reverse Gear and Bearing Assembly
b - Installer Tool (91-817007)
c - Bearing Carrier

Forward Gear

a
1. Press new propshaft bearing into gear. Lubricate
O.D. of bearing with Quicksilver Needle Bearing
Assembly Lubricant before installation. Press un-
til Installer Tool bottoms.
Installation Note: Push against numbered end of
bearing.
51205
4
Needle Bearing Assy. Lub. (92-825265A1)
4
a - Installer Tool (91-817005)
b
a
90-852572R1 JANUARY 1998
c
51264
51043
a
51291