Mercury 40 Service Manual page 327

4. Apply 2-4-C Marine Lubricant to lower pivot pin.
Using a suitable punch, drive lower pivot pin into
clamp bracket and trim cylinder assembly until
pivot pin is flush with outside surface.
95
2-4-C w/Teflon (92-850736A1)
a - Lower Pivot Pin
5. Using a suitable punch, drive lower dowel pin into
its hole until seated.
a - Lower Dowel Pin
5D-44 - MID-SECTION
a
95
51147
a
51148
6. Apply 2-4-C Marine Lubricant to surface of upper
pivot pin, pivot pin bore and trim ram bore.
a
b
95
95
2-4-C w/Teflon (92-850736A1)
a - Pivot Pin
b - Pivot Pin Bore
c - Trim Ram Bore
7. Using a suitable mallet, drive upper pivot pin into
swivel bracket and through trim ram until pivot pin
is flush with swivel bracket.
a
a - Pivot Pin
b - Swivel Bracket
c - Trim Ram
c
51148
b
c
51148
90-852572R1 JANUARY 1998