Each anode requires periodic inspection, especially in saltwater, which will
accelerate the corrosion. To maintain corrosion protection, always replace
the anode before it is completely corroded. Never paint or apply a protective
coating on the anode, as this will reduce the effectiveness of the anode.
a
c
b
Propeller Replacement—38.1 mm (1.5 in.) Diameter Propeller
Shaft
Rotating propellers can cause serious injury or death. Never operate the boat
out of the water with a propeller installed. Before installing or removing a
propeller, place the drive unit in neutral and activate the lanyard stop switch
to prevent the engine from starting. Place a block of wood between the
propeller blade and the anti‑ventilation plate.
PROPELLER REMOVAL
1. Shift the outboard into the neutral position and activate the lanyard stop
switch.
eng
MAINTENANCE
d
74980
WARNING
!
101
a -
Bottom of transom bracket
(1)
b -
Bottom of each power trim
ram (2)
c -
Bottom of power trim
pedestal (1)
d -
Underside of anti‑ventilation
plate (1)