Select The Teach Mode Using The Remote Input - Banner q4x Instruction Manual

Q4X Stainless Steel Laser Sensor
Remote
Input = Set
Input
Gray wire is remote teach input
1x
2x
4x
8x

3.4.1 Select the TEACH Mode Using the Remote Input

1. Access the TEACH selection.
Action
Double-pulse the remote input.
2. Select the desired TEACH mode.
Action
Pulses
T
1
T
2
T
T
3
T
T T
4
T
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
Starts selected Teach (same function as pressing Teach Button for > 2 sec)
Second pulse completes Teach (Two-point and Dynamic Teach only)
1x
Teach Selection
Two-point static background suppression
1x
Dynamic background suppression
2x
One-point window (foreground suppression)
3x
One-point background suppression
4x
Button Lock
Button Unlock (uloc)
1x
Button Lock (loc)
2x
Reset to Factory Defaults (maintain remote input = SET)
Figure 11. Remote Input Map
TEACH Mode
Two-point static background
suppression
T
Dynamic background suppression
T T
One-point window (foreground
suppression)
T
T T
One-point background suppression
T T
Pulse Timing (T)
0.04 seconds < T < 0.8 seconds
Timing between Pulse groups > 1 second
Result
T T
T
Result
The selected TEACH method displays for a
few seconds and the sensor returns to Run
mode.
displays.