Laser Description And Safety Information - Banner q4x Instruction Manual

(SELECT)(TEACH)
• Press to select menu items in Setup mode
• Press and hold for longer than 2 seconds to start the currently selected TEACH mode (the default is two-point
TEACH)
(+)(LO/DO)
• Press to navigate the sensor menu in Setup mode
• Press to change setting values; press and hold to increase numeric values
• Press and hold for longer than 2 seconds to switch between light operate (LO) and dark operate (DO)
(-)(MODE)
• Press to navigate the sensor menu in Setup mode
• Press to change setting values; press and hold to decrease numeric values
• Press and hold for longer than 2 seconds to enter Setup mode
NOTE: When navigating the menu, the menu items loop.

1.4 Laser Description and Safety Information

CAUTION: Use of controls or adjustments or performance of procedures other than those specified
herein may result in hazardous radiation exposure. Do not attempt to disassemble this sensor for
repair. A defective unit must be returned to the manufacturer.
Class 1 Lasers
Class 1 lasers are lasers that are safe under reasonably foreseeable conditions of operation, including the use of optical
instruments for intrabeam viewing.
Laser wavelength: 655 nm
Output: < 0.20 mW
Pulse Duration: 7 µs to 2 ms
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
Q4X Stainless Steel Laser Sensor