Product Description; Models; Overview - Banner q4x Instruction Manual

1 Product Description

Class 1 laser CMOS sensor with a bipolar (1 PNP & 1 NPN) output. Patent pending.
WARNING: Not To Be Used for Personnel Protection
Never use this device as a sensing device for personnel protection. Doing so could lead to
serious injury or death. This device does not include the self-checking redundant circuitry necessary
to allow its use in personnel safety applications. A sensor failure or malfunction can cause either an
energized or de-energized sensor output condition.

1.1 Models

Model Sensing Range
Q4XTBLAF300-Q8 25 mm (0.98 in) to 300 mm (11.81 in) Bipolar: 1 NPN; 1 PNP

1.2 Overview

The Q4X Sensor is a Class 1 laser CMOS sensor with a bipolar output. The normal sensor state is Run mode. From Run
mode, the switch point value and LO/DO selection can be changed and the selected TEACH method can be performed. The
secondary sensor state is Setup mode. From Setup mode, the TEACH mode can be selected, all standard operating
parameters can be adjusted, and a factory reset can be done.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
• The ultimate problem solver: reduce sensor inventory with a reliable, durable
sensor that solves the most challenging applications
• Solves difficult distance‐based applications regardless of target surface reflectivity,
including black foam on black plastic, black rubber in front of metal, multicolor
packaging and targets of all colors
• Reliable sensing range of 25 mm (0.98 in) to 300 mm (11.81 in) with best in class
excess gain
• Angled four‐digit display with submillimeter resolution is easily viewed from
multiple vantage points
• Display provides clear user feedback for easy setup, and bright output indicator
provides high visibility of sensor operation
• Intuitive setup utilizing three tactile buttons conveniently located below the display
• Durable and robust construction resists mechanical impact, over tightening and
extreme vibration
• FDA grade stainless steel, chemically‐resistant material and laser marked sensor
information withstands aggressive cleaning procedures
• Superior resistance to ambient light interference prevents nuisance output trips
under changing lighting conditions
• Temperature-compensated design ensures reliable detection during changing
temperature conditions
Output
Q4X Stainless Steel Laser Sensor
Cable
5-pin Euro M12 Integral Connector