Abbreviations - Banner q4x Instruction Manual

Q4X Stainless Steel Laser Sensor

5 Abbreviations

The following table describes the abbreviations used on the sensor display and in this manual.
Abbreviation Description
No valid signal in range
One-shot
First
Second
Two-point TEACH (static background suppression)
One-point background suppression
Button
Cancel
Display read
Output timing delay
Delay
Delay timer for one-shot
Dynamic background suppression
End—exit the sensor menu
Far zero reference location—the maximum range is 0 and the measurement increase as the target
moves closer to the sensor
One-point window (foreground suppression)
Full range
Excess gain
High excess gain mode
Input wire function
Lock/locked
Laser off
Master
Near zero reference location—the end of the barrel is 0 and the measurement increase as the target
moves further away from the sensor
Object
Off delay timer
On delay timer
Reset to factory defaults
Input wire = remote teach function
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com