Features; Display And Indicators; Buttons - Banner q4x Instruction Manual

Q4X Stainless Steel Laser Sensor

1.3 Features

Figure 1. Sensor Features

1.3.1 Display and Indicators

1
Figure 2. Display in Run Mode
Output Indicator
• On—Outputs conducting (closed)
• Off—Outputs not conducting (open)
Stability Indicator (STB)
• On—Stable signal within the specified sensing range
• Flashing—Marginal signal, the target is outside the limits of the specified sensing range, or a multiple peak
condition exists
• Off—No target detected within the specified sensing range
Active TEACH Indicators (DYN, FGS, and BGS)
• DYN, FGS, and BGS all off = Two-point TEACH mode selected (default)
• DYN on = Dynamic TEACH mode selected
• FGS on = Foreground suppression TEACH mode selected
• BGS on = Background suppression TEACH mode selected

1.3.2 Buttons

Use the sensor buttons (SELECT)(TEACH), (+)(LO/DO), and (-)(MODE) to program the sensor.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
1
2
3
2
1. Output Indicator (Amber)
2. Display
3. Buttons
The display is a 4-digit, 7-segment LED. The main screen is
the Run Mode screen, which shows the current distance to
the target in millimeters.
1. Stability Indicator (STB = Green)
2. Active TEACH Indicators
• DYN = Dynamic (Amber)
• FGS = Foreground Suppression (Amber)
• BGS = Background Suppression (Amber)